DMP Electronics XR20 Troubleshooting Guide download pdf (Page 29)

Printer Trouble

Is the panel connected to a printer?

YES - [ PRINTER -TRBL ] means that the 462P card isn’t getting the Clear to Send (CTS)

voltage.

• Check RJ-cable between 462P and printer. Should see 5 to 15 VDC for CTS

(Clear to Send) voltage between the cable's pins 6 and 7 at the 462P end.

• Check dip-switch settings on printer. (See next page.)

Model 462P Printer Card

NO - [ PRINTER -TRBL ] means that one or more options in Printer Reports is set to YES.

TECH NOTE: While the 462P Printer Interface Card will work with other serial printers, DMP

Technical Services only provide technical support for Okidata Microline 184T printers.

-NOTES-

_____________

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36 37

No comments

DMP Electronics XR20 Troubleshooting Guide Page 29